The PS4 emits various beeps, each of which indicates a problem with the system. The problem of PS4 beeps on shutdown can be solved by some of the methods that have been mentioned.
Some of these sounds are typical and do not signal a problem, while others try to alert you to a serious problem that needs to be addressed.
So your PS4 console beeps the first time you turn it on and then won’t turn on? Your PS4 is beeping and the sound may be coming from inside the console and not from the speakers.
As a rule, this is not a positive sign. This usually signals some sort of hardware failure or significant software corruption that negatively impacts certain hardware features.
These noises are called beeps and are used by the BIOS (the software that controls your PS4’s hardware) to notify you of certain basic system problems during POST (the initial test to make sure your PS4 is ready to run).
Cause of PS4 Beeps on Shutdown
There can be several reasons why your PS4 keeps beeping even after being turned off.
However, this problem occurs to many people and there are many troubleshooting options available, including basic measures such as restarting, updating, and cleaning. We’ll take a look at some of the most effective strategies to get your PS4 to stop beeping all the time.
How to fix PS4 beeps on shutdown?
- Restart PS4
- Update your PS4
- Check cables and clean PS4
- Contact the console manufacturer
- Turn off your PS4
- Check if PS4 has been put into sleep mode.
So let’s look at each solution one by one:
Solution 1 – Restart PS4
Restarting your PS4 is one of the easiest ways to fix the problem. This approach entails unplugging and replugging your PS4’s power cable, which will refresh its memory and restart it from scratch.
- To properly restart your PS4, follow the instructions below:
- Go to Power > Power Off PS4 to turn off your PlayStation.
- Disconnect the power, HDMI, and DS4 cables from the system.
- Hold down the power button for approximately 30 seconds until you hear two beeps.
- After about 5 minutes, reconnect the cords and turn them on again.
Solution 2: Update your PS4
If you still don’t know why your PlayStation 4 keeps beeping, the PlayStation manufacturer recommends that you update your device to the latest software version available. However, no one said that updating your PlayStation could cause problems. Even if this doesn’t solve your beep problem, it’s still worth a try.
- Enter “Settings”to check the system software.
- Then select System Software Update from the drop-down menu.
- See if any updates are available.
- Update your console if it’s out of date.
Solution 3 – Check cables and clean PS4
Cleaning your PS4 is always a good idea and to do this you need to remove the console seal and clean the dust off all the console panels.
However, if you still have a valid warranty, this operation will void it and in such circumstances it is preferable to send your console to the manufacturer for repair.
Solution 4: Contact your console manufacturer
If none of the above approaches work, it’s time to contact your manufacturers and fix the problem.
Before turning on the console, make sure you accurately describe your problem and list all troubleshooting options you’ve tried. They usually replace the sensor or fix the software on your PS4 to disable the sensor and stop the annoying beeping sound.
Solution 5 – Turn off PS4
It’s an easy-to-use approach, but it’s proven to work. All that is required is to turn off the console for about 30 seconds and disconnect the power line from the source.
Some people claim to have had success turning it off overnight and then back on the next morning.
However, if you don’t want to wait all night, the recommended PS4 shutdown duration is 3-4 minutes. After that, just plug it back in and see if the problem persists.
Solution 6 – Check if PS4 has been put to sleep
Many people mistakenly put their PS4 to sleep instead of turning it off.
The beep that occurs when the PS4 is in sleep mode is normal PS4 behavior and is usually the wrong pattern. When PS4 wakes up from rest mode, it will also beep.
To exit Safe Mode, turn off your console and turn it back on.
Conclusion
If none of the suggestions above work, your PS4 might have a serious hardware issue, in which case you should contact a professional or the PS4 support center.