If you’re facing connection issues or frequent signal drops, updating your Verizon iPhone cell towers is your best bet. Cell Tower updates for iPhone are released by the original carrier, be it Verizon, T-Mobile or Virgin. In this guide, we will only talk about Verizon because the process is more or less the same.
A carrier settings update is always helpful because it exposes new features released by Verizon. As a result, if VoLTE was not available before, it should be available after the upgrade. In addition, Carrier settings are usually loaded automatically and are requested before updating. If it doesn’t, you need to read this manual carefully. So let’s get started.
Why do you need to update cell towers in Verizon iPhone?
Unlike other countries that support GSM communications, Verizon made the iPhone work on the traditional CDMA network. As a result, updating cell towers is a must to maintain optimal performance and network connectivity in any area.
At worst, you may feel like you have a good network in the bedroom, and when you move into the living room, you will see that the network drops significantly. All this is due to the fact that cell towers are not updated. And if you update them, you won’t have to face such problems.
Also, if your carrier releases new products such as VoIP or VoLTE, you can only get them if you upgrade your Verizon iPhone cell towers. Unfortunately, failure to do so will result in poor network conditions and a permanently unstable signal. That’s why it’s always in your best interest to upgrade your cell towers whenever you encounter network problems.
How to update Cell Towers Verizon iPhone | Verizon Tower Upgrade Code
Under optimal conditions, if a cell tower update is available on your Verizon iPhone, you’ll be prompted to install it. If it’s not prompted, you’ll have to manually find it and install it. In any case, if there is any problem, you may need to reset your cell towers. We have discussed everything in detail below.
Your carrier may release cell tower upgrades depending on your needs. As a result, if you have an update available and it’s under review, follow these steps to update it:
- Open settings.
- Click on General.
- Click “About”.
Now, if an update is pending from Carrier, you will see it here. Follow the onscreen instructions to download and install the update.
If you recently installed a non-Verizon eSIM, follow these steps:
- Open settings.
- Click on General.
- Click “About”.
- On the About page, find Carrier and click on it.
- You will see a notification that a Carrier update is available. Click “Install”for the update to download and install itself.
How to update Cell Towers on latest iPhones?
If you have one of the latest iPhones like iPhone 12 to iPhone 14, you don’t need to update your carrier settings manually. Instead, your iPhone will do it by itself.
You just need to restart your phone and you’re done. In some cases, even switching the flight mode is enough to update cell towers. In addition, we found that in recent times, even updating cell towers on the iPhone is not required. This is due to the advent of 5G and other technologies.
Carrier updates are usually sent via phone updates, and once you install them, your job is done. You don’t have to worry about updating cell towers on the latest iPhones, even if they’re from Verizon.
How to reset cell towers in Verizon iPhone?
If you are facing persistent network issues such as signal drops or internet speed fluctuations, you may need to reset cell towers on Verizon iPhone. The steps to this are simple. Just follow these steps:
- Open settings.
- Click on General.
- Now click Transfer or Reset iPhone.
- Click “Reset”again.
- Now click “Reset network settings”.
- Now enter your password to confirm the operation.
After completing the above steps, your carrier settings will be reset and network issues will be resolved.
However, if you have one of the latest iPhones, you don’t need to do this. Instead, you just need to enable data roaming. You can find this option by doing the following:
- Open settings.
- Click on Cellular.
- Now tap Cellular Data or Mobile Data. If you are using T-Mobile you will see “Mobile Data”and if you are using Verizon you will see “Cellular Data”.
- Toggle to enable cellular data.
- Now click Cellular Options.
- Toggle data roaming.
- Restart your iPhone.
Here’s how you can reset carrier settings on your iPhone. This works for both old and new generation devices.
bottom line
Well, that’s all we have on how you can upgrade cell towers on Verizon iPhone. We hope this guide has helped you. If you still have any doubts, be sure to comment below.