If your Blink Camera is not recording motion, it may be due to low battery levels or a bad internet connection.
Blink cameras are battery operated and must be connected to the internet in order to detect and record motion.
If your Blink camera is not working properly, try checking the batteries and make sure the camera is properly connected to the internet.
Reasons why Blink Camera is not working?
There may be several reasons why your Blink Camera is not working. This could be a problem with the power supply, internet connection, or timing module.
If the outlet is not working, the camera will not have power and will not be able to work. If your camera is located far from the sync module, this may also be the cause.
If the Internet connection stops working, the camera may not be able to connect to the Blink servers and will not be able to record or stream video. If the sync module is not working, the camera will not be able to communicate with other Blink cameras on your system and will not be able to record video.
Why does my Blink camera keep turning off?
If your Blink camera keeps turning off, there are a few things you can try to reset your camera and get it working again. First, check if your Blink Camera is within range of your Wi-Fi router. If it’s far away, you may need to move it closer.
If that doesn’t work, try restarting your Blink Camera system by turning it off and on again. If that doesn’t work, you may need to reset your Blink Camera by pressing the reset button for 10 seconds. After you reboot the camera, it should start working again.
Why wasn’t my flashing camera working in real time?
Your flickering camera is reporting a live stream error for various reasons. The absence of this feature can indicate several problems, from sporadic connections to old batteries. Here are a few reasons why live streaming fails on your flashing camera.
- Battery life is low. An on-screen warning message informs you to turn off LiveView if your battery is running low.
- Incorrect settings have been made for the camera. To prevent the camera from reporting “Live View Error”, make sure your camera settings are correct.
- You are changing too many colors or filters at the same time. If you apply multiple filters or modifications to the same image, a “Live View Error”message will appear.
- Too many applications are open at the same time, which may cause the LiveView camera application to crash.
How to fix Blink camera not working?
If your Blink Camera is not working, there are several ways you can try fixing it. First, you can reset the sync module or cameras. If that doesn’t work, try turning your Blink cameras off and on again by unplugging them from the power source and then plugging them back in.
If you are still having problems, try moving the Blink cameras closer to the sync module as they may be out of reach. You can also try resetting the sync module by pressing and holding the reset button for 10 seconds.
If none of these fixes work, then unfortunately you may need to replace your Blink cameras as they may be faulty. We have also mentioned other camera troubleshooting locations:
Solutions to Fix Blink Camera Not Working
- Reset flashing camera
- Reset Blink Sync Module
- Check LED indicator
- Enabling and disabling the synchronization module
- Reset Wi-Fi Router
- Try a different power source
- Adjust intensity settings
- Customize control settings
- Change Your Blink Camera Batteries
- Adjust the Blink camera sensitivity setting.
- LED status
1. Reset flickering camera
You should try resetting your camera if you experience connection problems regularly. Often this is all it takes for Blink to resume normal operation. The benefit of having a working security system again outweighs the inconvenience of factory resetting your Blink gadget.
Because flashing cameras have different models, in most cases you can find the reset button on the back of the camera.
- First, locate the camera reset key. Blink cameras have a reset button on the bottom next to the batteries.
- The reset button should then be pressed and held for at least ten seconds with a paperclip or pencil. (For this, you will need a thin object to pass through the small hole.)
- The LEDs should start flashing red when the gadget is fully reset.
If this does not resolve the issue, reload the module.
2. Reset the Blink Timing Module
Hold down the reset button on the side of the module next to the USB port until the indicator turns red to reset the module. This may take 15 to 30 seconds. The reset was completed when you noticed one solid green light and one flashing light.
After performing this reset, the sync module will enter “configuration mode”. All linked cameras will be disabled. You must uninstall and then reinstall the sync module in the Blink app to use your cameras again.
Follow this procedure to uninstall and install the sync module:
- Tap the question mark icon in the Blink app.
- Remove the “Sync Module”option.
- Paste or scan the module model number.
- Select Delete.
- Now go back to the main panel and select the plus sign.
- “Blink Wireless Camera System”must be installed.
- Rescan or enter the serial number of the module.
- Select your Blink device.
- Turn on Device Discovery.
- Then select Join.
- Select Done.
3. Check the LED indicator.
What color is the LED on your device to start with?
If it is red, there is a problem connecting the device. Check your device’s signal by logging into the Blink app. Blink will experience connection issues more often if it has less than three signal bars.
On the other hand, if you notice a constant blue light, the camera is now taking pictures. The video stream may not be available while the camera is recording. This is a frequent occurrence in the system for various Blink camera models.
4. Switching the synchronization module on and off
The sync module must reconnect to Wi-Fi by powering the device off and on again. This is the fastest way to restart Blink.
You only need to unplug the sync module from the outlet, wait at least 10 seconds, and then plug it back in. During this time, you must remove and then replace the batteries. It’s time to fix the gadget with your network when it turns on again and flashes green or blue.
5. Reset your Wi-Fi router.
The Wi-Fi network may be to blame if you’re constantly having connection issues. Assess your wireless network; if it shows 3 signal level bars, then everything is in order; otherwise, reset it.
By pressing a key on the modem or briefly pulling it away from the wall, you can reset it. You have to pause for it to reconnect after turning it back on.
Now connect your camera to Wi-Fi. You will immediately notice the difference if your Wi-Fi is acting up! If the wi-fi is working fine after the reset, then you should fix the flashing camera issues.
However, you might also want to consider moving your router and sync module to be closer. Connection problems are more likely if these objects are too far away.
It’s possible that your flashing camera is not properly connected to your Wi-Fi if the distance between them is too far. This means that the camera does not have enough internet to work.
6. Try another power source
Remove the batteries, then connect the camera to a USB power source using the micro USB connector. By doing this, you will be able to use the camera without batteries.
However, this fix may not work for you depending on where you want to place the Blink camera. This method might still be worth trying because it will show if the batteries are damaged or dead.
7. Adjust intensity settings
In situations with high brightness, adjusting the intensity can be useful. The Blink camera will capture light from nearby street lights or parked cars. Access to live view on your Blink camera is preferred to determine if this setting needs to be changed.
8. Customize control settings
You can control the activation time of the night vision function using the control setting. By default, the camera works automatically, so when it gets dark, it turns on.
When night vision is enabled, it will be available all the time, including during the day. Even if motion is detected, the camera will not turn on if Off is selected.
9. Replace your Blink camera’s batteries.
A battery issue may be to blame if your camera won’t turn on. The battery capacity of Blink cameras is one of the main selling points for them. The camera itself consumes little power.
The AA lithium-ion batteries supplied with the camera have a shelf life of 2 years. If you haven’t changed the batteries since the beginning, your batteries are dead. You can also charge them if you have used rechargeable batteries.
Naturally, there is always the possibility that battery problems will show up sooner. And if you think it is, remove the batteries. Use AA lithium batteries in Blink cameras. Any label will also work.
10. Adjust the sensitivity setting of the Blink camera.
Adjusting the Sensitivity setting is another way to fix this. As a result, the camera sends motion alerts. And it is possible that you or someone else turned it off by mistake. The camera cannot detect someone because of this. How to change this setting:
- Activate the Blink app on your phone.
- Select the three dot icon.
- The sensitivity slider should be set to at least 5.
Do not set the sensitivity level to the maximum. If you do this, you will probably receive a lot of false notifications. Even small objects may be interpreted by your camera as the presence of a person.
11. LED indicator status
- A red blinking indicator will appear when you turn on the Blink Camera for the first time. This means you are setting up a wireless connection.
- On the right side of the front of the cam, a red LED lights up when new batteries are inserted.
- After the blue recording lights turn off, the camera’s LED flashes red five or six times to indicate that the batteries are low.
- When the camera detects motion, a quick red flash appears.
- Your Blink camera is on and taking pictures when the device has a solid blue LED.
- When the red LED is on constantly, there are connection problems.
- When the Blink Mini Camera is not connected to the network, the red light on the device will blink.
Conclusion
Blink security cameras have become a necessity in modern life. People who want to increase the security of their home and access their recordings remotely should have Blink cameras with Live View.
The ability to view live is subject to connectivity and hardware issues due to the way Blink cameras connect to and interact with the sync module.
You should contact Blink support if none of these solutions satisfies you. If you have any warranties, they can help you enforce them or suggest device repairs. In this case, you will need to purchase a new camera system.
FAQ
Why does the flashing camera not work at night?
Outdoor Blink cameras use IR to provide night vision. The result is a black and white image. Go to your camera settings to turn off the IR light.
Why doesn’t camera flashing work after changing batteries?
Turn the camera off and on again. Batteries should be removed for five seconds and then re-inserted if they support your camera. If the camera is powered by a USB cable, unplug the cable from the power outlet or the camera, wait five seconds, and then plug it back in.
Why doesn’t my Blink camera work in the cold?
Although CCTV cameras can operate in very cold or bad weather, their performance may be affected. You need to change the flashing camera settings to make it work in cold weather.
Why won’t my Blink camera work after a power outage?
Blink systems such as the Blink Mini require electricity and Wi-Fi or an internet connection; if any of these connections are lost, they will immediately resume normal operation upon reconnection.