How to Fix Nintendo Switch Dock Not Working

Do you have a Nintendo Switch? Having a problem with your Nintendo Switch Dock because it’s not working? If yes, then this guide is for you. Well, despite the excellent performance of the Switch Dock, we have encountered a number of strange issues, including connection failure and strange performance issues.

But there is nothing to worry about as we will help you fix your Nintendo Switch dock not working issue. So, if your dock has also been bothering you with such an unwanted error, be sure to read and apply the fixes mentioned below in this guide.

How to fix a problem with a Nintendo Switch Dock not working

There are several possible troubleshooting steps that can be easily taken care of if the Nintendo Switch Dock is not working. So, let’s get to them:

Fix 1: Check if you inserted the cable correctly

There is a possibility that the Nintendo Switch Dock is not working just because it is not properly connected. Yes, I know it’s rather strange, but in many cases we find that the docking station stops working when the cables are not connected tightly.

Therefore, it is recommended to properly tighten or connect/connect all cables. Then check again if the dock not working issue is resolved.

Fix 2: Power on and off the dock (HDMI switch not working)

If you find that all cables are properly connected to your dock, chances are that your Nintendo Switch Dock may have some random bugs or glitches that are causing it to not work properly. Therefore, it is very important to remove these errors from the RAM of your device. However, cycling is a good option for this. Therefore, in order to turn the dock off and on again, you must:

  1. Turn off the power button on the Nintendo Switch dock.
  2. After that, remove all wires and cables connected to it, including the power cable.
  3. After that, wait 20-30 seconds and connect the cables.
  4. Now turn on the Power button and check if Switch Dock not working issue is resolved.

Fix 3: Check the power connection

Therefore, it is very important to make sure that there are no voltage fluctuations, as this can damage the docking station. Meanwhile, we advise you to try using a different socket or port to check if there is a problem with the port.

Fix 4: Check your HDMI cable carefully

Sometimes a faulty HDMI cable also acts as the main culprit for this kind of problem. So, you must first unplug the HDMI cable from the dock and test it. Make sure the cable is not cut or damaged on the outside.

However, if you find them, replacing the HDMI cable would be the right choice to fix your Nintendo Switch dock not working problem.

Fix 5: Check for Damage

Although it is very unlikely that your dock has any external damage, we cannot dismiss it as sometimes a small dent can damage the device. So, reconnect all cables after turning off the power button.

Then take your dock and carefully check it for damage. However, if you find any damage, then without any risk, we advise you to point your cursor at the nearest Nintendo Service Center and have it repaired.

Fix 6: Clear Ports

There is a chance that there might be some dirt or debris in your port that will prevent the HDMI cable from making a proper connection between your device and the docking station. So, it would be great if you cleaned the ports of the Nintendo Switch dock.

But be aware that you should not use any sharp objects to clean the ports, as this can cause serious damage. Instead, you can use low-power air blowing, cotton swabs, etc.

Fix 7: Contact Support

Are you still getting the same error? Well, if this is the case, then there is no other option but to contact the support team. You can email them directly, hover over their support page, and file a complaint. Then, be patient until you get a response from the officials as they will definitely help you resolve this issue.

Summarize

I think you have fixed the Nintendo Switch dock not working issue. So, for now, that’s all. We just hope you learned something new from this troubleshooting article. On the contrary, if you have any doubts or questions about this topic, leave a comment below and let us know.

CDN CTB