Sonos Roam is a portable speaker that you can carry around and listen to your favorite music. The speaker is designed for outdoor use, making it portable enough to take to the pool, beach, camp, or wherever you go. Since this is a Bluetooth speaker, there are often connection problems. If you’re having trouble connecting your Sonos Roam speaker and can’t connect it to the device you’re using, this article will help you resolve the issue.
Content:
- 1 Fix Sonos Roam Bluetooth connection issue
Fix Sonos Roam Bluetooth connection issue
In this article, we will discuss how to fix Sonos Roam Bluetooth pairing/connection issues.
Charge your speaker
You will experience Sonos Roam Bluetooth pairing issues when your speaker is not charged. The speaker may disconnect from the device when the speaker’s battery is about to run out. Even if you try to plug it in, it will keep disconnecting. You should try charging the speaker and that will most likely fix the problem.
There are a few things to keep in mind when charging your speaker, such as:
- Make sure you are using a good quality certified cable. It is preferable if you use the cable that came with the speaker.
- The power supply or power adapter must have an output power of 10W (5V/2A).
- You must fully charge the speaker and then connect it to the device.
Most likely, charging your device should fix the problem, but if it doesn’t, you can move on to the next troubleshooting step in this article.
Make sure Sonos and your device are within range
If the Sonos speaker and the device you are trying to use are out of range, you may experience a Sonos Roam Bluetooth pairing issue. If this is the case, then you should try to place the Sonos Roam Bluetooth speaker and the connected device as close to each other as possible. Make sure they are nearby, and then connect the speaker to your device. After that, the problem will no longer occur.
Put your speaker in pairing mode
You may experience this issue if the speaker is connected to any other device. When the speaker is connected to one device, you will not be able to connect it to another device. Put the speaker into pairing mode and then connect the speaker to your device, which should resolve the Sonos Roam Bluetooth pairing issue. To do this, follow the steps given below:
- First, press and hold the Power button until you hear the pairing sound on the speaker.
- You will now see the LED indicator blinking blue, indicating that the speaker is in pairing mode.
- After that, try connecting the speaker to your phone, which should fix the problem.
Reset Sonos Roam Speaker
If you’re still facing the problem of pairing your Sonos Speaker Bluetooth, try resetting your Sonos Roam. Resetting your Sonos Roam speaker will return it to factory settings. To reset your Sonos Roam Speaker, follow these steps:
- First, turn off the speaker. To do this, press and hold the power button for 5 seconds until the LED indicator turns off.
- Keep holding the Power button and at the same time hold the Play button .
- While holding the play button , release the power button .
- Hold down the play button until you see the front LED flashing white and orange.
- After that, the speaker will be reset.
- Try connecting your Sonos Roam speaker to your device and you should be able to connect it without any problem.
Conclusion
These were some troubleshooting steps to help resolve Sonos Roam Speaker Bluetooth connection issue. If you are unable to connect your Sonos Roam speaker to your device, you can follow the steps in this article. The steps mentioned in this article will fix the problem you are having when connecting Sonos Roam.
FAQ
How to reset Sonos Roam Bluetooth settings?
We discussed the step by step process of resetting a Sonos Roam Bluetooth speaker in the article above. You can follow the steps above and you will be able to reset your Sonos speaker.
Why does Sonos Roam keep shutting down?
There can be various reasons why Sonos Roam may continue to shut down. You may experience this issue when the speaker is not charged or both devices are out of range.
How do I force restart my Sonos Roam speaker?
If you encounter a Sonos Roam Bluetooth pairing issue and want to force your speaker to restart, you should press and hold the power button on the back of your Sonos speaker until you hear a shutdown sound and the logo turns off. Wait a few seconds and then turn your device back on.
Why is Sonos Roam blinking orange?
If you find your Sonos Roam speaker flashing orange, it means your device is establishing a connection.