A variety of remote controls are available for various Roku media streamers, TVs and audio devices. There are many features that can make them significantly different even though they all look the same. The Roku Express remote is a simple infrared wand, just like the remote that comes with it.
In addition to the built-in microphones, the Roku Streaming Stick+ also supports wireless connectivity. You can find remotes that include both of these features, as well as a headphone jack for private listening, like the one that comes with the Roku Ultra.
But syncing the remote to your Roku TV without a pairing button isn’t easy. That’s why we’re here. This article will show you how to sync your Roku remote without the pairing button . So let’s get to the guide.
Content:
- 1 How do I pair or sync my Roku Remote without the pairing button manually?
- 2 How to set up Roku using the pairing button
- 3 Synchronize the remote using the mobile app
- 4 Some Frequently Asked Questions – Frequently Asked Questions
How do I manually pair or sync my Roku Remote without the pairing button?
It’s important to try pairing your remote manually if it doesn’t connect automatically. To do this, you will have to take several steps. First, insert the batteries into the remote control.
Then press the pairing button . So, after you press the pairing button for about five seconds, release it. It is recommended that the remote control blink green. If the pairing button has not been released after this time, press it again. You might expect the remote to attempt to automatically pair with your Roku device, but it may not be able to do so.
You may want to contact the manufacturer of your Roku if you are still unable to connect. Using your phone to control the remote is still possible if you can’t find the pairing button. To keep the remote within reach when someone else needs it, make sure it is within reach.
If you want to connect the remote to your Roku TV, you’ll first need to unplug it. First, make sure the new batteries power your Roku remote. If the battery compartment is empty, the remote cannot pair. If you open the battery compartment on the remote, you will usually find the pairing button located on the back.
Hold the remote close to your Roku device for at least one minute. You will be able to connect the remote when it starts flashing green. You should check the batteries to make sure they are rechargeable remote controls. If you want your TV to sync automatically, you can turn it off and on again.
How to set up Roku with the pairing button
- Once your Roku device is turned off, wait ten seconds and then reactivate it.
- Whenever you use the voice remote control, you must press and hold the pairing button for 20 seconds after removing the batteries. This will restart your remote.
- You sync your remote with your Roku device by holding the pairing button for 5 seconds.
- You will be able to control your Roku TV with the remote control.
Sync your remote using the mobile app
It acts like a remote for your Roku smart TV. You can use it like a regular remote by controlling it and pairing it with a real remote. However, you can use this method to pair devices if the pairing button is not working properly. You can link the app to your device by doing the following:
- Visit the Google Play Store or Apple App Store to download the official Roku app.
- Next, make sure your smartphone is connected to the same Wi-Fi network that your Roku device is connected to.
- Navigate to the” Remote “option in the Roku app.
- In the app, tap Settings.
- Go to the Remotes and Devices page .
- Then select “Set up a new device”.
You can search for available remotes on your Roku TV by clicking the search button. Once the remote is detected and selected, it will be paired if it works properly. If the pairing process doesn’t work, try again and see if it works.
Some Frequently Asked Questions – Frequently Asked Questions
Why is my Roku remote not paired?
You must pair the Roku remote during the first setup process, which cannot be done without a paired remote. It usually comes in a pair right out of the box, or you’ll pair it during the first setup process. Roku devices usually remember Bluetooth remote controls the first time they are paired.
However, there are times when things go wrong. Your remote may have been forgotten if you updated or rebooted Roku. You will have to re-link it. In order to get your new remote to work, you must pair the new remote with the old if your old remote has been replaced.
How to Connect Roku Remote Using TV Control Buttons
If your TV has physical buttons, you can access the pairing settings menu without using the remote control. Here’s what you need to do to sync your Roku remote without the pairing button :
- Go to your Roku home screen .
- Click Settings .
- On the Settings screen, tap Remotes .
- Click Remote Pairing .
After this step, it should automatically pair with your remote. Your remote control may be damaged or defective if it cannot be paired.
You may have a problem with the device if the Roku remote cannot be paired, which could be a problem with the device. In this case, it is recommended to restart the device.
Roku Remote Goes Popular: What Are You Doing?
You may need to replace the remote if you continue to use it for an extended period of time. If so, you need to stop using it immediately and take the following steps.
- If possible, place the remote control on a wooden table.
- Wait 15-20 minutes for the process to complete.
- Make sure the batteries are removed from the battery compartment.
- Make sure the batteries are in good condition and replace them if they are damaged.
Is there a way to reset my Roku Remote without the reset button?
There is no way to reset your Roku remote if it doesn’t have a reset button. So, as you already know how to sync a Roku remote without a pairing button; so, here are some options you might want to consider:
- To reset the remote, use the pairing button on the back. For this to work, hold down the pairing button for at least five seconds for this to work. You may need to reset your remote so it can sync with your Roku device again.
- Make sure the batteries are properly inserted into the remote before reinstalling them. This way the remote can be reset and synced back to your Roku device.
- You can reset the universal remote by removing and reinserting its batteries if you are using it.
- For further assistance, you may need to contact Roku support.
Summarize
So, here’s how to sync your Roku remote without a pairing button . We hope this guide has helped you. Also, if you need more information, leave a comment below and let us know.